Audio Technica ES935/ML Gooseneck Microphone Twin Kit

  • Daily Rate:

    £22.40

    Weekly Rate:

    £67.20

Please note that prices shown may vary, subject to requirements. To get the most accurate pricing details, please get in touch.

Equipped with Audio-Technica’s legendary electro-acoustic design innovations, the ES915ML is ideal for applications where quality sound and flexible performance are imperative.

This small-diameter gooseneck microphone provides highly flexible positioning while maintaining a well-contoured appearance. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard innovations. The ES915ML also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise. The microphone’s low-profile element provides a uniform MicroLine polar pattern with 90º acceptance angle. The microphone can be mounted on a podium or desktop with the included AT8474 low-profile isolation mount, which attenuates noise, shock and vibration transmitted through the mounting surface.

Features

  • Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
  • Low-profile element provides uniform MicroLine® polar pattern with narrow 90º acceptance angle
  • Unobtrusive design with an overall length of only 12.20″ (310.0 mm)
  • Plugs into any standard XLRF-type connector, or direct mounts to 5/8″-27 stands using included thread-mount adapter
  • Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
  • Available interchangeable elements permit angle of acceptance from 90º to 360º
  • Small-diameter gooseneck permits highly flexible positioning while maintaining smooth, contoured appearance
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: MicroLine®
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -35 dB (17.7 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum Input Sound Level: 133 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 107 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 4 mA typical
  • Switch: Flat, roll-off
  • Weight: 3.6 oz (102 g)
  • Dimensions: 12.20″ (310.0 mm) long, 0.31″ (8.0 mm) head diameter, 0.74″ (18.9 mm) base diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8138 foam windscreen; AT8651 thread-mount adapter; AT8658 shock mount

This small-diameter gooseneck microphone provides highly flexible positioning while maintaining a well-contoured appearance. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard innovations. The ES915ML also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise. The microphone’s low-profile element provides a uniform MicroLine polar pattern with 90º acceptance angle. The microphone can be mounted on a podium or desktop with the included AT8474 low-profile isolation mount, which attenuates noise, shock and vibration transmitted through the mounting surface.

Features

  • Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
  • Low-profile element provides uniform MicroLine® polar pattern with narrow 90º acceptance angle
  • Unobtrusive design with an overall length of only 12.20″ (310.0 mm)
  • Plugs into any standard XLRF-type connector, or direct mounts to 5/8″-27 stands using included thread-mount adapter
  • Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
  • Available interchangeable elements permit angle of acceptance from 90º to 360º
  • Small-diameter gooseneck permits highly flexible positioning while maintaining smooth, contoured appearance
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: MicroLine®
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -35 dB (17.7 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum Input Sound Level: 133 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 107 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 4 mA typical
  • Switch: Flat, roll-off
  • Weight: 3.6 oz (102 g)
  • Dimensions: 12.20″ (310.0 mm) long, 0.31″ (8.0 mm) head diameter, 0.74″ (18.9 mm) base diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8138 foam windscreen; AT8651 thread-mount adapter; AT8658 shock mount